Integrated Sewage Treatment Device
|Min. Order:||1 Set/Sets|
|Packaging:||Exquisite wooden box packaging or other packaging methods|
|Brand:||Weizhi water treatment|
|Place of Origin:||China Jiangsu|
|Supply Ability:||Annual output of 200 sets of water treatment equipment or even more|
The water quality design parameters of the integrated sewage treatment equipment are also calculated according to the general domestic sewage water quality design. The intake level is BOD5200mg/l, and the effluent BOD5 is calculated at 20mg/l. There are six parts: (1) Primary sedimentation tank (2) Contact Oxidation tank (3) secondary sedimentation tank (4) disinfection tank, disinfection device (5) sludge tank (6) fan room and fan. (1) Primary sedimentation tank: The primary sedimentation tank is a vertical flow sedimentation tank. At present, in most cases, this process has been omitted. In the initial settling process that has been completed in the previous adjustment tank, this part is generally changed to a hydrolysis acidification tank, or directly made into an anaerobic/ Anoxic device, that is to say A section of AO (2) Contact oxidation tank: The water in the anaerobic tank/anoxic tank flows to the contact tank for biochemical treatment. The contact tank is divided into three stages, with a total residence time of 4-6 hours Because the filler in this area is combined with aeration, generally combined fillers are used. The specific surface area of the filler is 160m2/m3, and the air-water ratio of the contact pool is about 10-20:1. In order to avoid short flow, the process section of qualified integrated equipment is divided into two stages. (3) Secondary sedimentation tank: The biochemical sewage flows to the secondary sedimentation tank. The secondary sedimentation tank is advection or vertical flow sedimentation tank. The HRT is generally 1.5 hours, and the water flow rise speed after diversion is generally 1.5mm per minute. (4) The disinfection pool and disinfection pool are in accordance with the standard: (TJ14-74) The standard is 30 minutes. If it is hospital sewage, the disinfection pool can increase the residence time to 1-1.5 hours. The disinfection adopts the disinfection method of solid chlorine tablets contacting and dissolving. The disinfection device can continuously change the dosage of the medicine according to the size of the water output, so as to achieve the purpose of adding more water with more water and adding less medicine with less water. It can be prepared separately if other disinfection devices are needed. (Note: If it is used for industrial sewage, the disinfection tank and disinfection device are not necessary) (5) Sludge tank: All sludge in the primary sedimentation tank and secondary sedimentation tank are lifted by air to the sludge tank of the integrated equipment for aerobic Digestion, the supernatant of the sludge tank is returned to the contact oxidation tank for reprocessing. After digestion, the remaining sludge is very small. Generally, it is cleaned once every 1-2 years. The bottom of the mud pool can be pumped and transported out. (6) Fan room and fan: The fan room is located above the disinfection pool. The inlet of the fan room adopts double-layer sound insulation, and the air inlet has a muffler and fan filter. Therefore, it is basically noise-free during operation. This equipment can also be installed according to customer needs. The room is integrated with the integrated equipment. If it is buried underground, attention should be paid to lighting and ventilation issues.
The integrated buried domestic sewage treatment equipment is based on the A/O biochemical process, which integrates domestic sewage and industrial wastewater similar to domestic sewage, such as biodegradation of sewage sedimentation, oxidation and disinfection. The equipment has a compact structure and a small area. All are set underground, economic operation, strong anti-shock concentration ability, high processing efficiency, convenient management and maintenance, after users use, the performance of the equipment meets the relevant requirements, the product has been approved by the State Environmental Protection Administration. These products will surely bring good news for protecting the living environment of mankind.
Features of the equipment 1. It can be buried below the surface, and the upper part of the equipment can be planted with flowers, trees, and lawns, or it can be set indoors. 2. No impact on the surrounding environment, less sludge generation, and noise less than the standard of the second-class area. 3. Fully automatic control, no need for *personnel management. 4. Simple operation, convenient maintenance, new technology, good effect and long service life. 5. The equipment can be arranged according to the standard or specially arranged according to the needs of the terrain.
Applicable scope of the equipment 1. Water treatment capacity: Standard type is 1.0 ~ 80.0 (m3/h), if it is greater than 80.0 (m3/h), it needs to be designed separately. 2. Raw water concentration: BOD5: standard type≤250mg/L, enhanced type≤400mg/L, if it exceeds 400 mg/L, it needs to be designed separately. 3. The equipment is mainly suitable for domestic sewage in residential areas, hotels, docks, airports, shopping malls, nursing homes, schools, factories and mines and similar industrial wastewater with relatively low concentration such as food industry and aquaculture.
The common materials used for sewage treatment equipment are carbon steel plate welding and glass fiber reinforced plastic circular tank body.
Suzhou Weizhi Water Treatment Equipment Co., Ltd
Suzhou Weizhi Water Treatment Equipment Co., Ltd. was established in 2008. The company has more than ten years of water treatment technology. It is a professional water treatment equipment company in Suzhou. By the end of 2019, water treatment technology has successfully implemented more than 1500 projects at home and abroad, with equipment treatment capacity of more than 60000 tons / day, and has solved water problems for more than 1500 customers, Industries involved: environmental protection, chemical industry, machinery, medicine, electronics, food, community water and other equipment; The company's existing production equipment: wastewater treatment equipment, reclaimed water reuse equipment, ultra pure water equipment, pure water equipment, evaporation equipment, etc; R & D projects: treatment of waste leachate, seawater desalination, application and development of energy recovery device, remote data acquisition of sewage treatment equipment and guidance tips for on-site practical application. Patents: at present, the company has 3 invention patents, 12 practical patents and 13 software patents. In addition, the company provides customers with fast and high-quality services with complete production and manufacturing plants, perfect design, excellent construction quality and perfect after-sales service quality. With the successful practice of thousands of projects, the company has extremely rich experience in design, implementation and operation.
- Company Name: Suzhou Weizhi Water Treatment Equipment Co., Ltd
- Representative: lizehong
- Product/Service: Water treatment equipment , Pure water equipment , Wastewater Equipment , Circulating water equipment , Reclaimed water reuse equipment , Ultrapure water equipment
- Capital (Million US $): 10000000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: No. 30-12, Lusheng Road, Luzhi Town, Wuzhong District, Suzhou City, Jiangsu Province
- Contact Person: Mr. lizehong
- Tel: 86-0512-62710991
Premium Related Products